Reasons for deformation of hydraulic filter casing

pageview:13 2023.10.11

       Hydraulic return oil filter is a common filtering device in industrial production, and some manufacturers often find deformation of the filter casing during the use of hydraulic filters. The possible reasons for this are as follows:
       1. Model selection error. When choosing to use filters, many businesses choose some low-quality hydraulic filters to save costs, resulting in shell deformation.
       2. Excessive internal pressure impact. Many times, the internal pressure of hydraulic filters cannot be reliably controlled, and under the long-term impact of corresponding pressure, it is easy to cause deformation or even rupture of the casing.
       3. Filter element issue. The filter element is a component that requires frequent cleaning, and if not replaced for a long time, it can cause blockage. If the entire hydraulic filter is started at low temperature at this time, it is easy to cause internal pressure bearing value to exceed the rated pressure value of the original hydraulic filter, leading to deformation of the appearance, and even damage to the filter.

       The above is the reason for the deformation of the hydraulic filter housing shared by Dongfeng Filter manufacturer with you. We hope it can be helpful for you when using hydraulic filters. If you have any questions about the filter or filter element, please feel free to contact us. We are available 24/7 and look forward to your call!!!