What are the working conditions of the return oil filter

pageview:14 2023.10.10

        The return oil filter can solve the drawbacks of a single tube filter. Clean or replace the filter without shutting down the machine to ensure normal operation of the host. If a return oil filter is installed, try installing it on the system return oil circuit. So, do you know the working conditions of the return oil filter?
        The distance between the suction pipe of the return oil filter and the return oil pipe should be as far as possible, and a partition should be installed to increase the path of liquid circulation. The surgical effect is a huge improvement. Seal for easy operation of the fuel return filter without waste. A sealing cover should be installed on the periphery of the oil tank, and an air filter should be installed on the cover to ensure a clean working environment inside the oil tank. Only when the return oil passes through the filter can the expected effect be achieved, and pollutants that cannot penetrate the oil tank cannot be filtered through the return oil channel. Before operating the system, special attention should be paid to cleaning the fuel tank to prevent pollutants from entering it.

        The return oil filter is located on the return oil pipeline at the end of the system, and its function is to filter out pollutants generated or invaded in the system before returning to the oil tank. The return oil filter removes particulate pollutants from the system and the system before the system oil enters the pipeline, providing clean engine oil for the system.